跳转到主内容

华为 P30 Pro 主柔性电缆接口更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 1

步骤 1
Huawei P30 Pro Main Flex Cable Connectors Replacement, Main Flex Cable Connectors: 步骤 0 中的图像 1,2 Huawei P30 Pro Main Flex Cable Connectors Replacement, Main Flex Cable Connectors: 步骤 0 中的图像 2,2
Main Flex Cable Connectors
  • Use a spudger to pry up and disconnect the left main flex cable connector from the motherboard.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

使用撬棒撬起左侧主柔性电缆连接器并将其从主板上断开。

要重新连接这样的压接接口,请仔细对齐并向下按压一侧,直到其卡入到位,然后在另一侧重复。不要向下压中间。如果连接器未对准,则插针会弯曲,从而造成永久性损坏。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利