将 Google Pixel 3 XL 机身打开

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的12本指南。

返回指南

英语

中文

上一步下一步

正翻译步骤 8

步骤 8

Google Pixel 3 XL Opening Procedure, Swing open the back cover: 步骤 0 中的图像 1，3

Google Pixel 3 XL Opening Procedure, Swing open the back cover: 步骤 0 中的图像 2，3

Google Pixel 3 XL Opening Procedure, Swing open the back cover: 步骤 0 中的图像 3，3

Swing open the back cover

Swing the right edge of the back cover upwards and rest the flipped panel along the left side of the phone.
Be sure to maintain slack on the fingerprint sensor cable and prevent it from being pinched.
During reassembly, this is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
During reassembly, follow this guide to install custom-cut adhesives for your back cover.
If you replaced the fingerprint sensor, you'll need to use this software tool to make the phone recognize the new sensor.

打开后盖

Bold
Italic
Underline
链接
从右侧的背盖往上开，轻轻晃动，像翻书一样往左侧直到打开。
Bold
Italic
Underline
链接
过程中请确保指纹辨识器保持些微松动的状态以避免它遭到受力或挤压。
Bold
Italic
Underline
链接
重新把装置组合回来时，推荐在继续黏回背盖以前，在此步骤将手机开机并确认各项功能都能正常运作。
Bold
Italic
Underline
链接
重新把装置组合回来时，可依照本指南将黏着胶黏回。
Bold
Italic
Underline
链接
如果过程中有更换指纹辨识器，请使用本软件来让手机和新的辨识器连上。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。

将 Google Pixel 3 XL 机身打开

正翻译步骤 8

指南步骤编辑键盘快捷键：