正翻译步骤 2
步骤 2
-
Remove one 2mm #00 Philips head screw from the bottom of the camera frame. This will free the lens and motherboard from the frame.
-
Gently separate the metal frame from the lens assembly just enough to reach the wire ribbon on the front side of the camera.
-
Use the rubber tipped tweezers to unplug the wire ribbon.
-
Remove the metal frame and slide the lens motor assembly out of the plastic frame.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。