跳转到主内容

Reemplazo de la placa de escudo de LCD de iPad Mini 3 Wi-Fi LCD

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的16指南

英语
西班牙语

正翻译步骤 8

步骤 8
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 1,3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 2,3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: 步骤 0 中的图像 3,3
  • Take the first pick you inserted and slide it up toward the top corner of the iPad.

  • If you can see the tip of the opening pick through the front glass, don't panic—just pull the pick out a little bit. Most likely, everything will be fine, but try to avoid this as it may deposit adhesive on the front of the LCD that is difficult to clean off.

Toma la primera púa que has insertado y deslízala hacia la esquina superior del iPad.

Si ves la punta de la púa de apertura a través del cristal frontal, no te asustes: tira un poco de la púa hacia fuera. Lo más probable es que todo vaya bien, pero intenta evitarlo, ya que puede depositar adhesivo en la parte frontal de la pantalla LCD difícil de limpiar.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利