跳转到主内容

iPad Mini CDMA 前面板更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的42本指南

英语
中文

正翻译步骤 4

步骤 4
iPad Mini CDMA Front Panel Replacement: 步骤 0 中的图像 1,3 iPad Mini CDMA Front Panel Replacement: 步骤 0 中的图像 2,3 iPad Mini CDMA Front Panel Replacement: 步骤 0 中的图像 3,3
  • While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.

  • Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

拉住吸盘,在玻璃和机壳之间的缝隙处放置一个撬片。

切勿将撬片插入深度超过黑色边框,这样深入过度可能会使LCD屏幕受损。

然后拉动吸盘塑料部分来将吸盘从显示模组上取下。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利