跳转到主内容

Sostituzione gruppo LCD iPad Mini CDMA

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的42指南

英语
意大利语

正翻译步骤 7

步骤 7
iPad Mini CDMA LCD Assembly Replacement: 步骤 0 中的图像 1,2 iPad Mini CDMA LCD Assembly Replacement: 步骤 0 中的图像 2,2
  • The LCD is glued to the metal LCD shield plate behind it along the top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to shift the LCD a couple of millimeters left and right several times.

  • Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.

  • Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case.

Il pannello LCD è incollato alla schermatura di protezione in metallo sul retro del pannello lungo i bordi superiori, destro e sinistro. Per ammorbidire in sicurezza questo adesivo dovrai usare un plettro per spostare di qualche millimetro il pannello LCD a destra e a sinistra più volte.

Infila un plettro nella fessura tra il pannello LCD e la copertura posteriore, vicino alla parte superiore del bordo sinistro del pannello.

Inclina leggermente il plettro verso l'esterno dell'iPad, giusto il necessario per allargare la fessura tra il pannello LCD e la copertura posteriore.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利