跳转到主内容

三星 Galaxy S6 Edge 屏幕更换

英语
中文

正翻译步骤 11

步骤 11
Samsung Galaxy S6 Edge Screen Replacement: 步骤 0 中的图像 1,1
  • Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments.

  • After removing all traces of glue and glass from the frame, clean the adhesion areas with 90% (or higher) isopropyl alcohol and a lint-free cloth or coffee filter. Swipe in one direction only, not back and forth.

  • If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. If necessary, replace the frame.

  • The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

在安装新的显示器之前,非常重要的一点是从框架上清除所有旧粘合剂的痕迹,同时要特别小心地除去所有小的玻璃碎片。

从框架上清除所有痕迹的胶水和玻璃后,用90%(或更高)的异丙醇和不起毛的布或咖啡过滤器清洁粘附区域。只能在一个方向上滑动,而不能来回滑动。

如果框架弯曲,或者遗留了任何胶水或玻璃残留物,则新显示器将无法正确安装,并且可能会损坏。如有必要,请更换框架。

保护新屏幕的最佳方法是使用一张定制的双面胶带。将胶带粘在屏幕背面,然后小心地将显示屏电缆穿过框架。对齐屏幕,然后将其按入到位。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利