跳转到主内容

Retirer le panneau frontal de l'iPad 3 4G

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的153指南

英语
法语

正翻译步骤 14

步骤 14
Removing iPad 3 4G Front Panel: 步骤 0 中的图像 1,2 Removing iPad 3 4G Front Panel: 步骤 0 中的图像 2,2
  • Once you have moved past the Wi-FI antenna (approximately 3" (75 mm) from the right edge, or right next to the home button) re-insert the opening pick to its full depth.

  • Slide the pick to the right, releasing the adhesive securing the Wi-Fi antenna to the front glass.

  • The antenna is attached to the bottom of the iPad via screws and a cable. This step detaches the antenna from the front panel, ensuring that when you remove the panel, the antenna will not be damaged.

Une fois que vous avez dépassé l'antenne Wi-Fi (à peu près 7 cm à partir du bord droit ou directement à côté du bouton home), réinsérez complètement le médiator.

Faites glisser le médiator vers la droite, pour décoller l'adhésif fixant l'antenne Wi-Fi à la vitre frontale.

L'antenne est attachée au bas de l'iPad par des vis et un câble. Au cours de cette étape, vous détachez l'antenne de la vitre frontale. Ainsi vous ne risquerez pas d'endommager l'antenne lorsque vous enlèverez le panneau.

-[* black] Once you have moved past the Wi-FI antenna (approximately 3" from the right edge, or right next to the home button) re-insert the opening pick to its full depth.
+[* black] Once you have moved past the Wi-FI antenna (approximately 3" (75 mm) from the right edge, or right next to the home button) re-insert the opening pick to its full depth.
[* black] Slide the pick to the right, releasing the adhesive securing the Wi-Fi antenna to the front glass.
[* black] The antenna is attached to the bottom of the iPad via screws and a cable. This step detaches the antenna from the front panel, ensuring that when you remove the panel, the antenna will not be damaged.

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利