iPad第六代Wi-Fi版本LCD前面板更换

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南。

英语

中文

正翻译步骤 5

步骤 5

Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
Slide the battery blocker underneath the logic board's battery connector at a 35 degree angle.
Don't push the battery blocker underneath the connector with excessive force. If you're having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery instead.
The battery blocker or playing card ideally should slide under the logic board without encountering any blockages. After insertion, it should rest at a 15 degree angle.
Leave the battery blocker in place as you work.

	[* red] Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
	[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
-	[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.
+	[* black] Slide the battery blocker underneath the logic board's battery connector at a 35 degree angle.
+	[* icon_note] Don't push the battery blocker underneath the connector with excessive force. If you're having trouble fitting the battery blocker underneath the logic board, you can try [guide\|143682\|using a playing card\|new_window=true] to disconnect the battery instead.
+	[* icon_note] The battery blocker or playing card ideally should slide under the logic board without encountering any blockages. After insertion, it should rest at a 15 degree angle.
+	[* black] Leave the battery blocker in place as you work.