我的工作台

快速访问设备的指南、配件和论坛

iPad 6 Wi-Fi LCD Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的11指南。

英语

韩语

上一步下一步

正翻译步骤 5

步骤 5

iPad 6 Wi-Fi LCD Replacement: 步骤 0 中的图像 1，3

iPad 6 Wi-Fi LCD Replacement: 步骤 0 中的图像 2，3

iPad 6 Wi-Fi LCD Replacement: 步骤 0 中的图像 3，3

Remove the single 2.3 mm Phillips #000 screw securing the battery connector to the logic board.
To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
Slide the battery blocker underneath the logic board's battery connector at a 35 degree angle.
Don't push the battery blocker underneath the connector with excessive force. If you're having trouble fitting the battery blocker underneath the logic board, you can try using a playing card to disconnect the battery instead.
The battery blocker or playing card ideally should slide under the logic board without encountering any blockages. After insertion, it should rest at a 15 degree angle.
Leave the battery blocker in place as you work.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。