跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 7

步骤 7
Re-insert your pick at the bottom edge of the iPhone, and slide it up the right side to continue separating the adhesive. Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel. Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel.
  • Re-insert your pick at the bottom edge of the iPhone, and slide it up the right side to continue separating the adhesive.

  • Don't insert the pick very far, or you may damage the display cables along this side of the iPhone. Insert it only a few millimeters, or about the width of the display bezel.

重新插入您的撬片在iPhone的底部边缘,并向右滑动它继续分离粘合剂。

请勿将插头插入很深,否则可能会损坏iPhone的这一侧的显示屏电缆。 只需将其插入几毫米,即显示器挡板的宽度即可。

在开源创作共享许可协议下,你的投稿已被许可