我的工作台

快速访问设备的指南、配件和论坛

(Windows) Installing a HP LaserJet Printer using the HP UPD

英语

中文

下一步

正翻译步骤 1

步骤 1

(Windows) Installing a HP LaserJet Printer using the HP UPD, Research - Check what personalities your printer uses: 步骤 0 中的图像 1，3

(Windows) Installing a HP LaserJet Printer using the HP UPD, Research - Check what personalities your printer uses: 步骤 0 中的图像 2，3

(Windows) Installing a HP LaserJet Printer using the HP UPD, Research - Check what personalities your printer uses: 步骤 0 中的图像 3，3

Research - Check what personalities your printer uses

Authors note: Any REASONABLY NEW laser printer supports PCL6 as a general rule (but confirm with the spec sheet!). However, some older monochrome lasers (and early low end color models, such as the CLJ CP1025) often have limited RAM (often 64MB OR LESS). This can result in "PCL personality error" pages, which clear with a power cycle.
Due to the general nature of this guide, specific languages are not covered. The HP UPD supports PCL6 and PostScript.
Find out what print languages your printer supports. The LaserJet Pro M401 series supports PCL6 and PostScript. However, PCL6 is recommended when possible.
Get your printer ready for setup. If you use USB, connect the printer now. If networked, make sure to get your printers IP address now as it will be needed later on.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。