注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。
正翻译步骤 1
步骤 1
-
There are six screws attaching the back housing to the camera. Remove the screws from the body with a PH000 screw head.
-
Two 1.5x2.5mm screws on the right side.
-
Two 1.5x2.5mm screws on the underside.
-
Two 1.5x2.5mm screw on the left side.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。