注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 4
步骤 4
Knot the low E, G, and B strings
-
Insert the springy end of the string into the hole in the tuning peg.
-
Pull the springy end over the tuning peg and to the left side.
-
Bring the springy end to the right side by passing it under the string, creating a loop.
-
Push the springy end through the loop, and then pull both ends until the knot is tight. You may have to press the knot with your finger tighten it completely.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。