注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。
正翻译步骤 1
步骤 1
-
Remove the single philips #00 screw on the button pad which are 2.2mm long. This screw is circled in red in the guide image.
-
Next, remove the two 2.4mm long screws located in between the LCD screen and the touch pad. These screws will require a Phillips #00 screwdriver.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。