跳转到主内容

MacBook Pro(13英寸,带有Retina显示屏,2013末)电池更换

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 10

步骤 10
MacBook Pro 13" Retina Display Late 2013 Battery Replacement: 步骤 0 中的图像 1,3 MacBook Pro 13" Retina Display Late 2013 Battery Replacement: 步骤 0 中的图像 2,3 MacBook Pro 13" Retina Display Late 2013 Battery Replacement: 步骤 0 中的图像 3,3
  • Temporarily leave your plastic card underneath the two rightmost battery cells to prevent them from re-adhering to the upper case.

  • If using an iOpener, reheat it and reapply it, this time to the left-most battery cells.

  • Again, leave the iOpener in each position for about a minute, reheating in between, to heat each half of the left-most battery cells.

暂时将您的塑料卡放在两个最右侧的电池单元的下面,以防止它们重新粘到上壳上。

如果使用iOpener,请重新加热并重新使用,这次是最左边的电池。

再次,将iOpener放在每个位置大约一分钟,再加热,以加热最左边的电池的每一半。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利