注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南。
正翻译步骤 9
步骤 9
-
Repeat this procedure with the adjacent battery cell:
-
Apply a small amount of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.
-
Alternatively, re-heat this section with your iOpener if needed.
-
Push a plastic card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。