注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南。
正翻译步骤 7
步骤 7
-
Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two.
-
When using the hot iOpener method, if you encounter significant resistance to prying, stop and use the iOpener to reheat the section you're working on.
| - | [* black] Push a plastic card between the right-most battery cell and the upper case, cutting the adhesive between the two. |
|---|---|
| + | [* black] Push a [product|IF145-101|plastic card] between the right-most battery cell and the upper case, cutting the adhesive between the two. |
| [* icon_caution] Throughout this procedure, be careful not to damage any of the battery cells with your tools. A damaged lithium-ion battery may leak dangerous chemicals and/or catch fire. Use only plastic pry tools. | |
| [* black] When using the hot iOpener method, if you encounter significant resistance to prying, stop and use the iOpener to reheat the section you're working on. |
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。