正翻译步骤 3
步骤 3
Fix damage from pins that got pushed in
-
Some pins had gotten pushed in far enough that they ripped up traces, so it was necessary to reroute their connections from the bottom vias.
-
To be able to solder to the vias, you have to scratch the solder mask off of them with a sharp tool like an Xacto knife.
-
Then it can finally be soldered to with a high gauge wire. I took a section of larger stranded-core wire, cut it, and unwound it.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。