跳转到主内容

ZTE ZMax Pro Back Panel Assembly Replacement

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

正翻译步骤 8

英语
中文
步骤 8
ZTE ZMax Pro Back Panel Assembly Replacement: 步骤 0 中的图像 1,1
  • Flip the phone over so that the screen is facing up.

  • Wedge the plastic opening tool between the screen and the rear panel.

  • Push up on the opening tool to separate the panel from the phone.

  • Continue to do this around the entire phone until the rear panel is no longer connected to the device.

  • The rear case and screen are fastened tightly to each other. It might help to use the picks as wedges to keep the case and screen separated as you run the opening tool along the edges.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利