注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的13指南。
Use the point of a spudger to lift the display cable connector up and out of its socket on the motherboard.
Avoid touching the motherboard with the tip of your spudger. The components surrounding the socket are fragile.
To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
If any part of your screen doesn't respond to touch after your repair re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.
During reassembly, pause here and replace the adhesive around the edges of the display.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助