跳到步骤＃10
由 oldturkey03 — 编辑
编辑已通过 由 oldturkey03
- 之前
- 之后
- 不变
步骤行
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Apply flux to the positive contact of the basttery on the PCB (Incidental finding is a SMD fuse F1 on this PCB) |
| + | [* black] Using desoldering braid unsolder the positive contact from the PCB. |
| + | [* black] Apply some gentle pressure with a small tool to remove the battery. |
| + | [* icon_caution] The battery should remove easily. If it does not, double check the battery contacts on the PCB to ensure they are not still connected somewhere. Another going over with the soldering iron may be required to complete that task. |