跳到步骤＃2
由 Taylor Dixon — 编辑
编辑已通过 由 Taylor Dixon
- 之前
- 之后
- 不变
步骤行
| [* red] Remove the 6.4mm screw from the inside of the flash bezel. | |
| + | [* icon_note] If the flash is locked down, insert the battery, then with the help of a pencil [https://d3nevzfk7ii3be.cloudfront.net/igi/sPDkAXD2Sw2EHNgO.full|turn the rotary] (CW or CCW) switch until the "125" is displayed in the LCD. Press the Flash symbol button. You should hear the latch from the flash, then you can manually lift the flash. If OK, then remove the battery from the camera |