跳到步骤＃13
由 Arthur Shi — 编辑
编辑已通过 由 Arthur Shi
- 之前
- 之后
- 不变
步骤行
| [* black] Carefully peel away the remaining piece of film, fully exposing the adhesive strips. | |
| - | [* black] Set the battery lightly in place. |
| + | [* black] Set the battery lightly in place in the device. |
| [* black] Plug in the battery connector temporarily to ensure that the cable reaches the socket. Disconnect the battery before resuming reassembly. | |
| [* black] Press the battery into place, and continue with your repair. |