Walking through a ghost town and admiring the dilapidated houses’ tin roofs.
Crawling through an abandoned complex long gone and deciphering the graffiti pasted on over time.
Driving my Suzuki Samurai along old Native American trails.
Soaking in the concentrated, complex culture of an old city center.
Standing in absolute darkness and silence in ancient lava tubes.
Eating fresh made gelato for the third time while watching the sun set.
These are a few moments of life I have enjoyed.
The standard stuff
I was born in Shanghai, China. My family headed for San Francisco when I was five, and that's where I grew up most of my life.
I wanted to be an inventor! So, I pursued electrical engineering (I really should have chosen mechanical engineering, but that's another story!) I got schooled hard at Cal Poly and finally left with a MS in EE with a focus on mechatronics and control systems. Along the way, I also found my life purpose and my best friend.
- Playing, explaining, and promoting modern board games.
- Taking stuff apart (not necessarily to put back together)- because I'm curious!
- Playing violin in ensembles. I am currently involved with Cal Poly's Arab Music Ensemble.
- Going on adventures! Visiting places I haven't been before!
- Trying out new foods of different ethnicities.
1 / 22 页
1 / 246 页
Jeep Repair— 2013 jeep Sahara hood wont openCommunity member @jlew04's question has been moved here: Installed grill guard now hood won’t open or release enough to reach...
回复： How does flood illumator look on ear speaker for iPhone XYou can see the flood illuminator in the second image here: iPhone X 听筒+前传感器组件的替换 If you are asking which traces in the flex cable is responsible for the flood illuminator, I can’t help you with that. As far as I understand, unfortunately the entire front sensor assembly is paired with the iPhone and must be transferred over to retain FaceID
回复： electrical cord replacement on shark rocket HV301Hi Jan, Does the power cord easily disconnect from the vacuum cleaner? If not, I can offer two options: (1) Repair the current power cord. If done correctly, this is a much cheaper option and is perfectly safe and durable. You would just have to cut out a bit of the power cord, strip the wires, solder, and adequately shrink-wrap/insulate them. If you don’t feel comfortable doing that, any local repair shop or electrician should be able to help you out. They also should not charge you very much for the simple repair. (2) Buy a generic replacement vacuum cleaner power line. You can find them online by searching for “shark vacuum cleaner power cord”. Any one that has 3 wires would work. You can even choose how long you’d like it to be! However, the tricky part would be to re-attach the cord to the vacuum cleaner, as they did not make the cord easily replaceable. This may unfortunately require disassembly.
回复： Logic board replacement iPhone SEUnless the battery leaked, the logic board should not just die from neglect. Was the phone working perfectly before? Chances are the battery has slowly drained below a “safe” voltage, and the power management refuses to charge it. There is a chance that the power management is broken. If that’s the case, then a logic board replacement/microsoldering repair would be needed.
回复： How do you open the mouseTry following this guide to open up your mouse.
回复： Safe Note 7 battery?Hi Miguel, It may be possible, but not safe to use the Note 7 battery in the FE, even though it would connect. The Note 7 battery is slightly bigger physically than the FE’s and trying to fit it into the FE would increase the chance of fire.
回复： I can't login in forgot passwordYou can try to factory reset the tablet. Doing so will wipe all user data/apps from the tablet. (1) Make sure the tablet is charged. Losing power while performing the factory reset may brick your tablet. (2) Turn the tablet off. (3) Hold the [volume up] button and the [power] button. Continue holding until you see “Android System Recovery” show on the screen. Release all buttons after you see that. (4) Use the volume buttons to scroll to the “wipe data/factory reset” option. Use the [power] button to select it. (5) Press the [power] button to confirm the user prompts.
回复： My KitchenAid KSM7586PCA 7-Quart Pro line burnedHi Claudete, It looks like there is no easy fusible link to replace, so something is probably burned out on the control board. Follow this guide to take the mixer apart to the control board (step 6). See if you can see any burned components. If you reply with a picture of the board (like this), we may be able to help identify what part is burned out. The cheapest solution may be to buy a replacement board, or go to an electronics repair shop.
回复： iPhone X / XS Loudspeaker CompatibilityVisually, it does not look like they are. The X loudspeaker has a notch in the bottom right corner to accommodate a screw post. iPhone X loudspeaker iPhone XS loudspeaker
回复： Which parts/kits needed to replace LCD&Dig and Battery on iPh 7+?Hey Keith, You basically need to make sure you cover all the tools and parts in the battery and screen guides. In your case, there are two major routes: (1) Full screen kit (and guide link), which includes many small parts already pre-mounted on it, making replacement much easier. The kit will also have all the tools you’ll need for a battery replacement. You would just need to purchase the following parts: (1.1) Replacement battery (1.2) Replacement battery strips (2) Bare LCD and digitizer (guide link), which is tailored for more experienced repairers. Since that is a bare part, you will need to purchase all the tools and parts (like the stickers and adhesive) listed in the guide, in additional to the battery & battery strips.
回复： Where is the motherboard battery?Hi Alx, I would guess that it may be under this cover.
1 / 11 页