跳到这一步
由 Ian Thompson — 编辑
编辑已通过 由 Arthur Shi
- 之前
- 之后
- 不变
步骤行
| + | [title] Board Setup Testing pt. 1 |
|---|---|
| + | [* blue] obtain a USB to TTL serial converter cable |
| + | [* green] locate the GND and RXD lines (mine were black and yellow respectively, but always check first). Using jumper cables, attach the GND and RXD lines to a 5-pin terminal block as shown |
| + | [* violet] plug the 5-pin terminal block into the port shown |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加