跳到步骤＃3
由 Arthur Shi — 编辑
编辑已通过 由 Arthur Shi
- 之前
- 之后
- 不变
步骤行
| [* black] Use a the flat end of a spudger or a fingernail to carefully pop the two digitizer cable connectors straight up from their sockets. | |
| [* icon_caution] To avoid damaging your iPad, pry only on the connectors themselves, ***not*** on the socket on the logic board. | |
| + | [* icon_reminder] During reassembly, make sure that these connectors are completely seated in their sockets, or you may encounter display issues. |