跳到步骤＃6
由 Kane Chauhan — 编辑
编辑已通过 由 Arthur Shi
- 之前
- 之后
- 不变
步骤行
| - | [* |
|---|---|
| + | [* icon_note] Notice the two connections attaching the back of the camera to the motherboard. |
| [* black] To disconnect the white wire, pinch the wire casing and pull directly out from the camera. It will take a very small amount of elbow grease. However, do not force or pry it. | |
| [* black] To disconnect the ribbon connector, softly pull the back away from the motherboard. It should come undone with little force. | |
| [* black] Once removed, set the back in a safe place. |