Sony Xperia Z Ultra - Password Removal, Firmware update

ZFix 和 3 其他贡献者

最后更新于 March 13, 2018

15 - 30 分钟

简单

社区贡献指南

简介

转到步骤 1

If you forgot your password, PIN, pattern drill, or your device can't start correctly, you can change the firmware with PC Companion. The program will install the latest version of the firmware and will erase all personal data.

If your device is connected to the internet and you have an installed Google account on it, look at this manual:

如何使用 Android 设备管理器远程重置 Android 设备

Please SUBSCRIBE to my channel ツ

视频概述

步骤 1 Sony Xperia Z Ultra - Password Removal, Firmware update

Sony Xperia Z Ultra - Password Removal, Firmware update, Sony Xperia Z Ultra - Password Removal, Firmware update: 步骤 1 中的图像 1，3

Sony Xperia Z Ultra - Password Removal, Firmware update, Sony Xperia Z Ultra - Password Removal, Firmware update: 步骤 1 中的图像 2，3

Sony Xperia Z Ultra - Password Removal, Firmware update, Sony Xperia Z Ultra - Password Removal, Firmware update: 步骤 1 中的图像 3，3

Download and install Sony PC Companion on your PC.

编辑

步骤 2

Insert wisdom here.

编辑

步骤 3

Sony Xperia Z Ultra - Password Removal, Firmware update: 步骤 3 中的图像 3，3

From here you can update the phone firmware, but the device must be powered on and with not locked screen.
Start "Support Zone".
Start "Phone / Tablet Software Update".

编辑

步骤 4

Sony Xperia Z Ultra - Password Removal, Firmware update: 步骤 4 中的图像 3，3

Connect your laptop to the power adapter.
Now, select "repair my phone / tablet".
The last warning for your personal information.

编辑

步骤 5

You phone must be at last 80% charged.
Choose the model.
Attention!!! You must choose the right model.

编辑

步骤 6

Sony Xperia Z Ultra - Password Removal, Firmware update: 步骤 6 中的图像 3，3

Switch off the Phone. Press and hold the volume-down button and then insert the micro USB cable.
When your PC recognizes the device, PC Companion will download the latest firmware for your model and will install it to the device.

编辑

步骤 7

Sony Xperia Z Ultra - Password Removal, Firmware update: 步骤 7 中的图像 3，3

If you have a problem with connecting the phone with the PC, you must download and install drivers.
In the device manager / Universal Serial Bus controllers you must have SOMC Flash Device.
S1Boot Fasboot drivers

编辑

步骤 8

When PC Companion finished, disconnect the phone and switch it on.
Now your device is with the latest firmare version, in factory state without any personal data and security.
.
Did you do it successfully?
Please SUBSCRIBE to my channel ツ