SR 306-12951100 Acoustic Guitar Tuning Keys Replacement

Michael Biancardi 和 2 其他贡献者

最后更新于 May 6, 2020

791

浏览统计数据:

过去24小时

0

过去 7 天：

2

过去 30 天：

8

总计

791

2

2指导意见。

转到指南评论

2

2 人已将本指南标记为“已完成”。你会是下一个完成的人吗？

标记为完成

1

1 人收藏（并订阅）了本指南。你会是下一个吗？

添加到收藏夹

10 - 20 分钟

大概的维修时间（用它来规划你的维修）

简单

难度等级：简单！需要少量拆卸，仅需使用基本工具。

简介

转到步骤 1

Tuning keys are necessary to play a guitar. However, they can sometimes break, especially on old or used guitars. This makes playing the guitar significantly more difficult or, in some cases, impossible. If the tuning keys on your guitar are broken, this guide will help replace them. Specifically, this guide will help you repair and replace tuning keys on an SR 306-12951100 Acoustic Guitar. We will be replacing the old tuning keys with 3x3 plate tuning keys.

This guide assumes you have already removed the strings from the guitar. If you have not, follow Steps 1 and 2 from this guide for instructions.

你所需要的

配件

• 3x3 Plate Guitar Tuning Keys (Kaish Guitar Tuning Keys)

  加盟链接

  在 Amazon 上有售https://www.amazon.com/gp/product/B01JLT9AUG/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
  查看

工具

• 

  Phillips #1 Screwdriver

  $5.49 iFixit$8.99 Moody - Made in USA

  5

  添加到购物车
• 

  Microfiber Cleaning Cloths

  Sale price $3.99

  Regular price $4.99

  4.8

  添加到购物车

查看更多...

当你通过这些链接购买商品时，iFixit 会赚取佣金。

步骤 1 Tuning Keys




• Remove the four outer screws.
• Then remove the four inner screws.
• The screws are located on the back of the guitar head.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2



• Slide all of the collars off of the old tuning keys.
• The collars are found on the tuning key pegs on the front head of the guitar. One of the collars is indicated in the first picture.
• Some of the collars may be difficult to remove. Apply gentle pressure until they pop off.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Remove the old tuning keys by sliding them out of the holes.
• It helps to put the guitar on its side and hold the head of the guitar from the front and push the old tuning keys out the back.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4
• Clean the guitar head and tuning key holes using a microfiber cloth to ensure that the new tuning keys will fit properly.
• This step may require more or less effort depending on how much epoxy was used to hold the old tuning keys in place.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 5
• Insert one of the new tuning key racks into the appropriate tuning key holes.
• Both of the new tuning key pieces are identical, so either plate can be used.
• The plate should have an overall length of 102 mm. The center to center distance between posts should be 35 mm.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 6
• Insert the second tuning key rack into the appropriate tuning key holes.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 7
• Begin installing the four outer screws.
• Then install the four inner screws.
• The dimensions of the screws that come with the kit are 31 mm x 35 mm x 27 mm.
• Do not tighten the screws until all of them are in place. Once all eight screws are in, go back and tighten each one. This is done so that the new tuning keys can be properly aligned.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 8
• The tuning keys are now properly installed.
• Install new guitar strings by following this video (start at 1 min 20 sec.) and this guide.
翻译
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论

作者

与2其他贡献者

Michael Biancardi

于01/16/20注册

213 声望

撰写一个指南

徽章: 5

• 
• 
• 

+ 2更多徽章

团队

University of North Texas, Team S1-G10, Raign Spring 2020 University of North Texas, Team S1-G10, Raign Spring 2020 的会员

UNT-RAIGN-S20S1G10

2 名成员

创作了1篇指南

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

预览