加入维修社区 - 创建账户

简介

If your phone's battery seems to drain very quickly and it can no longer hold a charge, you may consider replacing your phone's battery. This guide will help you quickly and easily change the battery in your Punkt MP02. Check our battery troubleshooting page to ensure that your phone requires a new battery first. Before you begin, backup important data, and power off the device to ensure no data loss throughout the process.

If the battery is puffy or swollen, the battery is a fire hazard. Carefully remove and handle it according to iFixit's guide on handling swollen batteries.

你所需要的

步骤 1 Battery

Punkt MP02 Battery Replacement, Battery: 步骤 1 中的图像 1，2

Punkt MP02 Battery Replacement, Battery: 步骤 1 中的图像 2，2

Use a SIM card eject tool to to eject and remove the SIM card tray on the side of the phone.

翻译

询问修复机器人

步骤 2

The back panel is held on by glue and multiple tabs.
Slide a Jimmy into the seam between the back panel and the chassis.
Slide the Jimmy around the perimeter to release the back panel, with care not to damage the retaining clips.
Clean any old adhesive with a spudger and isopropyl alcohol, then apply new adhesive to the back panel before reinstalling it.

翻译

询问修复机器人

步骤 3

Punkt MP02 Battery Replacement: 步骤 3 中的图像 3，3

Use a Phillips screwdriver to remove the two adjacent 3 mm Phillips screws.

翻译

询问修复机器人

步骤 4

Punkt MP02 Battery Replacement: 步骤 4 中的图像 3，3

Insert a Jimmy into the seam between the front and back case.
Slide the Jimmy around the perimeter while prying to separate the front and back case.

翻译

询问修复机器人

步骤 5

Use a spudger to pry up and disconnect the battery press connector.
Make sure to pry under the connector itself and not on the board.

翻译

询问修复机器人

步骤 6

Gently pry the battery off with the spudger tool.
Take care not to bend, warp, or puncture the battery during removal.

翻译

询问修复机器人

结论

To reassemble your device, follow the above steps in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.