/
我的工作台

快速访问设备的指南、配件和论坛

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
注册
登录
加入世界上最大的维修社区
Philips Sonicare 2 Series Motor Replacement

Philips Sonicare 2 Series Motor Replacement

Jonathan Jarvis

Jonathan Jarvis 和 4 其他贡献者

最后更新于 March 10, 2019

20分钟 - 1小时
困难
动态照片拍摄
需要更好的图片
缺少的步骤

简介

转到步骤 1

This guide is for the Philips Sonicare 2 series HX6211/46 toothbrush. It shows you how to replace the motor for this toothbrush. He is a link for a guide how to soldering which will be needed for this guide. 如何焊接和拆焊

你所需要的

配件

工具

查看更多...

  1. Philips Sonicare 2 Series Motor Replacement, Philips Sonicare 2 Series Disassembly: 步骤 1 中的图像 1，1

    • Pull upwards to remove the brush head from the top of the device.

    编辑

  2. Philips Sonicare 2 Series Motor Replacement: 步骤 2 中的图像 1，1

    • Remove the 12 mm T8 Torx screw from the bottom of the toothbrush. After removing the screw, pry off the base with a plastic opening tool.

    编辑

  3. Philips Sonicare 2 Series Motor Replacement: 步骤 3 中的图像 1，2 Philips Sonicare 2 Series Motor Replacement: 步骤 3 中的图像 2，2

    • Remove the internal electronic mechanism from the housing by prying the red clips shown in the figure. This removes the charging port.

    • Be very careful not to damage the charging port during this step. Otherwise you will have to solder this part back to the device as shown in the second figure.

    编辑

  5. Philips Sonicare 2 Series Motor Replacement: 步骤 4 中的图像 1，1

    • Next you will be able to remove the internal electronic mechanism as shown in the figure.

    编辑

  6. Philips Sonicare 2 Series Motor Replacement: 步骤 5 中的图像 1，1

    • Remove the white battery cover as shown in the figure.

    编辑

  7. Philips Sonicare 2 Series Motor Replacement: 步骤 6 中的图像 1，1

    • Remove the white circuit board cover as shown. This cover will require you to pry off the piece from the groves .

    编辑

  8. Philips Sonicare 2 Series Motor Replacement, Motor: 步骤 7 中的图像 1，1

    • Disassemble the device. Remove the plastic piece over the brush attachment as shown. Object can be removed by hand as shown. No tool is required.

    编辑

  9. Philips Sonicare 2 Series Motor Replacement: 步骤 8 中的图像 1，1

    • Desolder the motor from the circuit board at the two locations shown.

    编辑

  10. Philips Sonicare 2 Series Motor Replacement: 步骤 9 中的图像 1，1

    • Remove the bad motor.

    编辑
终点

作者

与4其他贡献者

Jonathan Jarvis

于04/01/16注册

515 声望

创作了4篇指南

徽章: 10

+ 7更多徽章

团队

IUPUI, Team S6-G2, Baechle Fall 2017 IUPUI, Team S6-G2, Baechle Fall 2017 的会员

IUPUI-BAECHLE-F17S6G2

3 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 5

过去 7 天： 21

过去 30 天： 32

总计 2,812