Insignia NS-D160A14 Motherboard Replacement

Ian Hanken 和 4 其他贡献者

最后更新于 August 12, 2016

5分钟

中等

特色学生指南

简介

转到步骤 1

If there are major problems with your Insignia NS-D160A14's functionality, it could be due to a faulty motherboard. This short guide will teach you how to remove the motherboard so it can be replaced. The process is very easy, so let's get started!

你所需要的

工具

Phillips #2 Screwdriver
加盟链接
在 Amazon 上有售
查看

当你通过这些链接购买商品时，iFixit 会赚取佣金。

步骤 1 Outer Case

Insignia NS-D160A14 Motherboard Replacement, Outer Case: 步骤 1 中的图像 1，1

Unplug the power cord before proceeding to open the DVD player's enclosure.
Remove the two 7mm Phillips #2 screws from the back of the DVD player.

翻译

步骤 2

Carefully lift the outer case up, starting from the back.
Removing the outer case may require some force, and you will need to get the case into an angled position compared to the rest of the DVD player before it can be completely separated.

翻译

步骤 3 Front Panel

Insignia NS-D160A14 Motherboard Replacement, Front Panel: 步骤 3 中的图像 1，3

Insignia NS-D160A14 Motherboard Replacement, Front Panel: 步骤 3 中的图像 2，3

Insignia NS-D160A14 Motherboard Replacement, Front Panel: 步骤 3 中的图像 3，3

Unhook the 4 hooks on the main casing.
There is one hook on the top of the casing, one on the bottom, and one on each side.
These hooks are brittle and can easily break.

翻译

步骤 4 Motherboard

Insignia NS-D160A14 Motherboard Replacement, Motherboard: 步骤 4 中的图像 1，1

Remove the central 7 mm screw holding the motherboard in place.
Be sure to ground yourself before manipulating the motherboard. A static shock could render one or more components on the motherboard useless.

翻译

步骤 5

Disconnect the white power cord connector from the motherboard.

翻译

步骤 6

Keeping the 8-pin connector as straight as possible, lift the motherboard out of case.
You may need to bend the side of the case slightly to give the motherboard room to be lifted out.