Disassembling Canon EOS Digital Rebel XT (350D) Cover

Briley Brewer 和 2 其他贡献者

最后更新于 December 29, 2024

30分钟 - 1小时

简单

详尽分析

社区贡献指南

简介

转到步骤 1

In this guide, you will remove the camera’s covering. Please note that this involves thoroughly disassembling the entire camera and should only be done if you need direct access to the camera membrane.

你所需要的

工具

当你通过这些链接购买商品时，iFixit 会赚取佣金。

步骤 1 Cover

Disassembling Canon EOS Digital Rebel XT (350D) Cover, Cover: 步骤 1 中的图像 1，1

Make sure to remove the battery to avoid any harm to yourself or the camera.
At the bottom of the camera, there are 5 screws. Use the Phillips #00 head to remove all 5 screws

编辑

步骤 2

Use your thumbs and push up to gently remove the eye lens cover.

编辑

步骤 3

Remove the 2 screws under the eye lens cover using the Phillips #00 head.

编辑

步骤 4

Turn the camera to the left side and use Phillips #00 head to unscrew the the top and bottom screws of the panel.

编辑

步骤 5

There is another screw on top of the panel on the left side of the camera. Use Phillips #00 head to remove it.

编辑

步骤 6

Turn on the camera on the right side and use Phillips #00 head to remove the 2 screws parallel from one another.

编辑

步骤 7

There is another screw on top of the panel on the right side of the camera. Use Phillips #00 head to remove it.

编辑

步骤 8

Open the memory card port and take out the CompactFlash from the inside. Upon removing the flash remove the 3 screws with a Phillips #00 head.

编辑

步骤 9

Carefully remove the back camera cover with your fingers.

编辑

步骤 10

Gently remove the orange ribbon cable from the motherboard using your hands or tweezers. Carefully detach the orange ribbon cable connector from the body of the camera.

编辑

步骤 11

Looking at the front side of the camera, remove the 2 screws below the Canon flash with a Phillips #00 head.
Make sure to avoid touching the lens itself directly to prevent scratches or dirt.

编辑