修复你的物品 社区 商店
加入维修社区 - 创建账户

Asus ROG G20CB RAM Replacement

简介

Upgrading or replacing the RAM (memory) on the Asus ROG G20CB can help boost system performance, especially for gaming, multitasking, or professional workloads.This guide will walk you through how to safely access, remove, and install RAM in the G20CB's compact chassis.

Important:

  • The G20CB uses DDR4 SODIMM (laptop-style) RAM, not standard desktop DIMMs.
  • Maximum supported memory depends on your CPU and motherboard model, but generally caps around 32GB (2x16GB).

你所需要的

  1. Asus ROG G20CB RAM Replacement, Fan: 步骤 1 中的图像 1，2 Asus ROG G20CB RAM Replacement, Fan: 步骤 1 中的图像 2，2

    • Remove each of the two 4.6 mm Phillips screws on the top and bottom of the tower.

    翻译
    询问修复机器人

  2. Asus ROG G20CB RAM Replacement: 步骤 2 中的图像 1，1

    • Slide the front panel to the left and lift gently.

    • There is a cable connecting the panel to the computer. Handle it gently and avoid straining the connected panel.

    翻译
    询问修复机器人

  3. Asus ROG G20CB RAM Replacement: 步骤 3 中的图像 1，1

    • Disconnect the cable carefully by pulling gently on both sides of the connector.

    翻译
    询问修复机器人

  4. Asus ROG G20CB RAM Replacement: 步骤 4 中的图像 1，1

    • Remove the five 4.6 mm Phillips screws holding down the fan tray and then pull the fan tray out of the system.

    • The fans are connected by a thin cable, be gentle when removing tray.

    翻译
    询问修复机器人

  6. Asus ROG G20CB RAM Replacement: 步骤 5 中的图像 1，1

    • Carefully unplug the two fan cables from the motherboard by pulling straight up from the base of the connector.

    翻译
    询问修复机器人

  7. Asus ROG G20CB RAM Replacement: 步骤 6 中的图像 1，1

    • Remove the six 4.6 mm Phillips screws connecting the fans to the fan tray.

    翻译
    询问修复机器人

  8. Asus ROG G20CB RAM Replacement, CPU Cooler: 步骤 7 中的图像 1，1

    • Remove the 4.6 mm Phillips screw that secures the optical drive.

    翻译
    询问修复机器人

  9. Asus ROG G20CB RAM Replacement: 步骤 8 中的图像 1，1

    • Push the optical drive out of the chassis.

    翻译
    询问修复机器人

  10. Asus ROG G20CB RAM Replacement: 步骤 9 中的图像 1，1

    • Pull back the tape on the heat sink and use a long-neck Phillips screwdriver to remove the four screws securing the heat sink.

    • There is a number next to each screw, when taking the cooler off, loosen in descending order (4-3-2-1). When installing a cooler, tighten in ascending order.

    翻译
    询问修复机器人

  11. Asus ROG G20CB RAM Replacement: 步骤 10 中的图像 1，1

    • Remove the 4.6 mm Phillips screw from the heatsink at the top of the case.

    • Lift the CPU cooler out of the system.

    • Be sure to apply fresh thermal paste before reinstalling a cooler.

    翻译
    询问修复机器人

  12. Asus ROG G20CB RAM Replacement, RAM: 步骤 11 中的图像 1，1

    • Gently push outward on the two retaining clips on either side of the RAM stick.

    翻译
    询问修复机器人

  13. Asus ROG G20CB RAM Replacement: 步骤 12 中的图像 1，1

    • The RAM module should pop up at an angle.

    • Pull the RAM stick out carefully by grasping it by the edges.

    • Avoid touching gold contacts.

    翻译
    询问修复机器人
结论

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

另外一个人完成了本指南。

作者

与2其他贡献者

Kimber-Starr

于03/21/25注册

361 声望

创作了3篇指南

徽章: 7

+ 4更多徽章

团队

UMass Dartmouth, Team 3-3, Botvin Spring 2025 UMass Dartmouth, Team 3-3, Botvin Spring 2025 的会员

UMASSD-BOTVIN-S25S3G3

3 名成员

创作了5篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 23

过去 30 天： 53

总计 547