三星Gear S3 前置挡圈更换
简介
转到步骤 1想必您的三星Gear S3有遇到磨损、反应迟钝、或或不如此前流畅这些状况。 这一教程将会指导您如何拆卸并替换前置挡圈。
你所需要的
请严格遵守这些步骤， 以达到完美拆解并重新组装您的设备。
请严格遵守这些步骤， 以达到完美拆解并重新组装您的设备。
26等其他人完成本指南。
团队
Cal Poly, Team S15-G2, White Fall 2018 Cal Poly, Team S15-G2, White Fall 2018 的会员
CPSU-WHITE-F18S15G2
4 名成员
创作了34篇指南
44指南评论
I’ve tried lining it up with the screen and pushing it in about 50 times now and everytime I do it clicks, but after rotating it a few times the bezel locks and I can’t rotate it anymore. YES all the ball bearings are in the right place, YES the springs are in the right place. There’s this little plastic piece that I can’t tell if it goes inside the bezel piece or if it goes on top of the watch next to the ball bearings. I’m able to get the bezel back on when I put the little plastic piece on the bezel, it clicks right in, but it locks up. When I leave the little plastic piece on the watch I can’t get it to click in at all. I think I just royally f’ed up my watch!
put the plastic ring in the bezel first. make sure the the legs on the plastic ring are facing the watch an not the bezel. i lost 2 springs though. be careful when cleaning and tilting.
did u manage to fix it?
Dave Green - 回复
