菜单

你的设置

返回指南
英语
中文

正翻译步骤 1

Step 1
Contains small springs and ball bearings. We suggest working over a plate or tray. Hold the watch firmly in one hand, face up. Place the iFixit Opening Tool under the bezel ring and use prying motion to remove.

  • Contains small springs and ball bearings. We suggest working over a plate or tray.

  • Hold the watch firmly in one hand, face up.

  • Place the iFixit Opening Tool under the bezel ring and use prying motion to remove.

  • The plastic retainer is manufactured with an open gap, you did not break it.

  • For reassembly, set the plastic retainer in the ring, then press the ring down until it snaps in place.

在此我们强烈建议您在盘子/托盘上完成一系列操作， 因为在操作中需要/可能拆卸下弹簧或轴承。

将手表正面抽上握在手中。

将iFixiit 拆卸工具（iFixit Opening Tool）置于手表挡圈下， 轻轻撬动将其移除。

这里的塑料固定器（plastic retainer）之间的缝隙时有意这么设计的， 而不是认为损坏。

以重新组装， 将塑料固定器（plastic retainer）放置在环内， 并向下轻轻按压直到其归位。

在开源创作共享许可协议下，你的投稿已被许可。