修复你的物品 社区 商店

Repair and disassembly guides and support for dish washing appliances.

707 个问题 查看全部

更多选项

replaced main control - same F2 E2 error

2021 Whirlpool dishwasher - 15 months old - just past warranty :(

parts look just the same as shown here...power surged and then the e2 f2 code started flashing

I checked connecting wire continuity - OK

replaced user interface (with buttons) board - same F2 E2 error

replaced main control - same F2 E2 error

repairman proposed same solution...

time for new dishwasher!

回答此问题 我也有这个问题

这是一个好问题吗？

是 否
得分 0

1条评论:

@indycarl your DW is a Whirlpool WDT720PADM2? Just to verify, You did replace the main control module?

由完成的

添加一条评论

1个答案

筛选条件:
最有帮助的 最新 最老的

更多选项

@indycarl this is tough since we do not know what your repair person checked etc. Usually all you have to do is to:

  • Removed the front panel.
  • Checked 4 pin connector on the P1C connector on both the UI board (thin PCB that interfaces with the buttons) and the main control board (larger control board where all the colored wires interface)
  • On the same connector measure the voltage between pin 2 and 4. It should show ~5V.
  • .If there is no voltage replace the main module
  • If there is 5V replace the console.

Your DW should be using the W10610059 tech sheet. Just in case you do not have it, get it here W10610059 Tech Sheet W10610059 Rev B

这个答案有帮助吗？

是 否
得分 0
添加一条评论

添加你的答案

IndyCarl 将永远感激不已
浏览统计数据:

过去 24 小时： 3

过去 7 天： 5

过去 30 天： 16

总计 850