跳转到主内容

Guides and repair information for Altec Lansing speakers.

45 个问题 查看全部

rock box xl it wont charge how can I repair it.

I have a rock box xl works fine when ot would turn on. When i plug it on it wont charge. I think the charging port has disconnected from the circut board. Is there a part i can buy to repair it. Also how do i take it apart

回答此问题 我也有这个问题

这是一个好问题吗?

得分 1

1条评论:

Can you upload some images of the device?

完成的

添加一条评论

3个答案

@signal flare yes that is a possibility as well as a bad battery but we would need to see more. It appears as if there are some screws in the back and side pieces. Looking at the rim of the case it appears to be snapped.So running a plastic opening tool along the edge should release that after the removal of any screws.

Block Image

Post some pictures of your own Rock box so we can see what you see and hopefully assist you further. 在已经存在的问题里加入图片

When you are taking it apart take lots of pictures and create a guide for the next person that may have issues with it. https://www.ifixit.com/Guide/new it's pretty straight forward.

这个答案有帮助吗?

得分 0
添加一条评论

taking apart is rather simple, has some Hex screws size H2.5 once the 6 screws are removed then pry the 3 sides of the end to pop off the side. from there it's only 2 screws holding the box with the port. from there the parts are somewhat standard but if your needing to replace the board then you will need to know how to solder. Hope this helps

这个答案有帮助吗?

得分 0

2条评论:

I have a similar problem.... however, I cannot pry open the ends of the speaker... Already took off the screws, but the ends of the speaker are really stuck...

How did you pop off the sides?

完成的

You have to remove the three rubber bumpers. You need two flat head screw drivers stick the first in the bottom slot. Once the end pop up hold it in place. Use the second screw driver place it in the other slot pop up the other section.

完成的

添加一条评论


You have to remove the three rubber bumpers. You need two flat head screw drivers stick the first in the bottom slot. Once the end pop up hold it in place. Use the second screw driver place it in the other slot pop up the other section

这个答案有帮助吗?

得分 0
添加一条评论

添加你的答案

signal flare 将永远感激不已
浏览统计数据:

过去 24 小时: 5

过去 7 天: 18

过去 30 天: 104

总计 2,482