声誉积分: 1
1
My Dsi was fine but one day I turned it on and pressed a to go onto a game and it said " an error has occurred. please press and hold the power button to turn the system off. please refer to the operations manual for details." my brother said it's different than everybody else. please help me!
声誉积分: 841千
1.4千
944
2.4千
Here is a preliminary suggestion until we can get more detail.
1) Check whether the Micro SD in FAT32 format.
2) Check whether the dsi pins are clean. Many problems are caused by dirty pins
3) Sometimes it takes some time to recognize the Micro SD. If the error occurs try restarting, wait for 5-10 seconds and then start the board
There is also the possibility that your DSi has Nintendo firmware which can block flashcards etc.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 2
过去 30 天： 6
总计 1,244
We need to know more. Did you follow the instructions from the manual? What were those instructions? Does it turn on at all?
由 Phillip Takahashi 完成的
What firmware are you using and what card are you using? Did you have any recent updates? What does your brother see that makes him say "it's different than everybody else"?
由 oldturkey03 完成的
Mine does the same but with everything including settings
由 Tony Silvia 完成的