跳转到主内容

8.9" or 10.2" LED-backlit display, 1.6GHz Intel Atom N270, released October 29, 2008.

11 个问题 查看全部

LED suddenly stopped working after only a yr. and a half?

The LED on my daughter's 1 1/2 yr. old HP Mini suddenly stopped working. Tried hard re-boot but no luck. CPU, fan, etc. seem to be working OK but no display. Would hooking up to external display help diagnose? if so, how do I connect?

已回答! 显示答案 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

1个答案

已选择的解决方案

It is my understanding that the Mini 1000 has an external VGA port. Though the notebook has a VGA monitor output, it uses a small custom connector, so you’ll need to purchase an optional adapter cable to use an external monitor. http://www.amazon.com/s/?ie=UTF8&keyword... has the cable you would need, hope that helps and good luck to you.

这个答案有帮助吗?

得分 2

5条评论:

+ good but is there a way he can zap the PRAM, move the display or boot in Target mode. Please excuse my PC ignorance, I'm a Mac Man.

完成的

turkey - congrats on the Ace!

完成的

Thank you Sir :-) with a "normal" PC I would recommend to remove the RAM and to listen to the error code on boot up to make sure that the CPU is working and then replace the memory and try to get in the BIOS. But HP/Compaq netbooks are a little bit more finicky with a lot or proprietary hardware architecture. Since the fan on this particular machine boots up and the LCD was previously replaced I would check with an external monitor to verify the fault to be the display. Just to bad that even the VGA connector is proprietary and does not utilize a normal D connector...

完成的

My problem is with a 2 year old HP Notebook 2000, close enough I hope. When connected to my Samsung smart tv the notebook works just fine but the notebook screen when by itself is very dim. How does this help in repairing the notebook and what's next?

完成的

geduffy sound slike you are either having a bacjklight problem on your motherboard or a bad LCD panel backlight. The panel is easier to repalce than trying to find a schematic for your logicboard to hunt down a failed component. I'd start with the panel.

完成的

添加一条评论

添加你的答案

Brian 将永远感激不已
浏览统计数据:

过去 24 小时: 0

过去 7 天: 5

过去 30 天: 9

总计 1,101