No sound in left headphone after tripping over the wire

Question

Sony MDR-ZX100

MDR-ZX100 ZX Series stereo headphones made by Sony.

20 个问题查看全部

Faraz Khan @farazk86

声誉积分: 23

1

发帖于: 2016年3月6日

更多选项

No sound in left headphone after tripping over the wire

Hi, I have a Sony MDR-ZX110 Headphone, its basically new and have only used it for a couple weeks.

Last night I tripped over the headphones and after reconnecting them sound from the left side had gone. Right side is working perfectly.

I checked the entire wire and kept wiggling it starting at the port all the way up to the speaker connection, at no point did I hear any connection, as is expected with broken wires if at some point a connection is made sound may come back.

I opened the heaphones to reveal the wire connection to the speakers and tested using a multimeter the connections and the port. The left side gave no repsonse on the resistance test indicating a broken connection someplace.

Is there any way to fix this? Thank you

已回答！ 显示答案我也有这个问题

这是一个好问题吗？

是否

得分 1

添加一条评论

2个答案

已选择的解决方案

oldturkey03 @oldturkey03

声誉积分: 783.4千

1.1千

893

2.3千

发帖于: 2016年3月6日

更多选项

@farazk86 "expected with broken wires if at some point a connection is made" not necessarily with the type of wires used in those headphones. If the wiring is okay at the driver end, you most likely tore some wires at the connector end which is the most common cause. It is unlikely (but of course possible) that the wires broke anywhere in between. I would suggest that you replace the connector. Check this guide for the repair. Different headphones, same issue.

这个答案有帮助吗？

是否

得分 4

3条评论:

Hi. Thanks for answering. But i followed the guide but still there is nor sound in the left speaker.

I checked the wires with a multimeter. Checking the connections of the wire against the right speaker I see a reading on the multimeter but doing the same on the left speaker I dont get any response.

So I believe the wire is broken.. Are there any solutions to this?

Thank you

由 Faraz Khan 完成的 2016年3月8日

None other than to replace the wire. You did replace the jack?

由 oldturkey03 完成的 2016年3月8日

You can also use a multimeter to test the wires and plugs for continuity to find what's broken.

由 mayer 完成的 2016年3月10日

添加一条评论

Hi. Thanks for answering. But i followed the guide but still there is nor sound in the left speaker.

I checked the wires with a multimeter. Checking the connections of the wire against the right speaker I see a reading on the multimeter but doing the same on the left speaker I dont get any response.

So I believe the wire is broken.. Are there any solutions to this?

Thank you — Faraz Khan
None other than to replace the wire. You did replace the jack? — oldturkey03
You can also use a multimeter to test the wires and plugs for continuity to find what's broken. — mayer

Bork Lazer @borklazer 声誉积分: 1 · Answer 1 · 2018-10-27T10:47:27-07:00

Bork Lazer @borklazer

声誉积分: 1

发帖于: 2018年10月27日

更多选项

I have the same problem, did you find a way to fix it yet?

这个答案有帮助吗？

是否

得分 0

添加一条评论

Sony MDR-ZX100

No sound in left headphone after tripping over the wire

2个答案

添加你的答案