On & Off button
I can not get my camera to turn on could the on & off button be broken
Linda Jones, could be but that is uncommon. Make sure that you have good batteries and that the contacts are not corroded etc. If those are okay, I would suggest to take the camera apart and take a look at the connectors and the logic board itself. there are usually power fuses on the board. You'll need a multimeter to work on those.
Have had this problem From very Beginning. Thought was O/P problem but now see is product defect. Piece of JUNK. No more Kodak products. Doug
过去 24 小时： 1
过去 7 天： 1
过去 30 天： 6