声誉积分: 1
1
1
Does anyone know a good back cover that fits probably? My white iPhone 3GS has some hairlines and cracks at the dock connector. Now I want to replace it with a black back cover, I will need a mute switch in black, sim tray in black and the back cover of course (maybe a dock connector?).
Anyone got experience with http://www.sw-box.com/wholesale-iPhone-3... ? Or know any shop where I can buy the stuff I need.
Thanks!
声誉积分: 88.9千
203
262
144
The place you're looking only sells wholesale. You want a site that will sell the parts individually.
There is not much demand for this part, so your best bet is to get it from eBay or a parts phone if you have one with an unrelated problem.
这个答案有帮助吗？
Why shouldn't I buy http://www.sw-box.com/apple-iPhone-3gs-1... ? It includes Chrome Front Bezel, Battery Black Backing Cover, Volume Button, Camera Lens, Earphone Jack. If I buy the mute button and Sim tray I'm done?
Do you know any shop where they have good fitting back covers ?
声誉积分: 88.9千
203
262
144
声誉积分: 88.9千
203
262
144
You're looking at a wholeseller only.
Check Jack Telecom for the part. I can't link it here because of the spam filter, but it's the first link on Google. They have it black and white.
Here it is in white.
这个答案有帮助吗？
Put the link in and let's see if it gets filtered. But as the question is 4 years old, the issue has probably been settled.
声誉积分: 2.7千
7
29
2
I bought 3rd party, looks fine. Seperating the bezel is simple, just pry it off and get some glue and stick it back down. there's also the headphone jack bezel and speaker mesh you will want to transfer. also, there's 2 metal pins in the case you will want to remove these and put them in the new one, and there's some other stuff you will see on the old case that are stuck down, you can just pry them up and put them back in place.
这个答案有帮助吗？
过去 24 小时： 0
过去 7 天： 2
过去 30 天： 4
总计 2,563
1条评论
Another side question. Anyone who did replace the back cover with succes? Was it hard to do? How does your phone look like now?
由 deluxz 完成的