跳转到主内容

修复你的物品

维修的权力

商店

型号A1367,闪存容量:8、16、32及64GB

1318 个问题 查看全部

Stripped solder pad on battery connector

Hello,

I was attempting to de-solder the battery from an ipod touch 4th gen., sadly I stripped the solder pad for the thermistor pin. Power and ground pins are fine. I am wondering if the ipod will work without the temperature sensor pin connected, and if not, how can I repair the trace, I was thinking silver conductive glue. Any advice or suggestions appreciated

thank you for your time

已回答! View the answer 我也有这个问题

这是一个好问题吗?

得分 0
添加一条评论

Essential 工具包

我们最紧凑的套装中最有用的工具。

现在开始购物

Essential 工具包

我们最紧凑的套装中最有用的工具。

现在开始购物

1个回答

已选择的解决方案

matt prior, you are not the first person that this happens to. Here is my answer from a very similar question:" If the pad has been completely ripped off the board, the only options would be:

1) Find the trace the pad normally connects to, scrape off some lacquer and re-attach to a new point. or 2) Replace the whole board. You should be okay with attaching the cable to the race or the next point where the trace leads to. You need a good magnifying lamp, a steady hand and good equipment. You should also check on here Anyway to reattach solder pads? " This is from solder pads on iPod Touch 3g battery replacement. Check this link for all the questions/answers about solder pad repair. No, it will not work properly unless it is all connected the way it is supposed to. Hope this helps, good luck.

这个答案有帮助吗?

得分 1
添加一条评论

添加你的答案

matt prior 将永远感激不已
浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 7

总计 3,963