当前版本： Chris Reader

标题:

Not displaying correctly after replacing digitiser

文本:

设备:

iPad Air Wi-Fi

状态:

open

编辑： Chris Reader

标题:

Not displaying correctly after replacing digitiser

文本:

设备:

iPad Air Wi-Fi

状态:

open

编辑： Chris Reader

标题:

文本:

Hi. I have replaced digitiser, and before securing screws and sticking down I switched on to test. All seemed or working perfectly so I went ahead, but after securing I had a problem with screen. I had a line across middle where everything above was perfectly positioned, but everything below was slightly too high. This meant I had party of notification bar repeated on bottom and Several rows of image missing in middle.

I opened up again to check everything connected properly, but have caused more problems. Image is repeated and jumping up and down screen, now cannot get past home screen. I think I may have neglected to disconnect battery the second time around and am now concerned I have damaged LCD.

What is the most likely cause of this?

Thanks

设备:

iPad Air Wi-Fi

状态:

open

原帖由： Chris Reader

标题:

Not displaying correctly after replacing dugitiser

文本:

Hi. I have replaced digitiser, and before securing screws and sticking down I switched on to test. All seemed or working perfectly so I went ahead, but after securing I had a problem with screen. I had a line across middle where everything above was perfectly positioned, but everything below was slightly too high. This meant I had party of notification bar repeated on bottom and Several rows of image missing in middle.

I opened up again to check everything connected properly, but have caused more problems. Image is repeated and jumping up and down screen, now cannot get past home screen. I think I may have neglected to disconnect battery the second time around and am now concerned I have damaged LCD.

What is the most likely cause of this?

Thanks

设备:

iPad Air Wi-Fi

状态:

open