当前版本： John

标题:

Removing the lower case of an early 2015 MacBook Air

文本:

I need to repair what I’ve identified as an early 2015 MacBook Air (Model A1466, EMC2925). Every guide lists 10 screws to remove. However, I can only see 6: 4 on the leading edge of the front of the computer, and 2 on either corner of the hinge side.

I used a plastic wedge to pop two plastic snaps on the sides, but the hinge side won’t come apart without using a lot of force, and it seems as if I’m bending the case.

Is there something I’m missing?

设备:

MacBook Air 13" Early 2015

状态:

open

已接受的回答:

编辑： John

标题:

Removing the lower case of an early 2015 MacBook Air

文本:

I need to repair what I’ve identified as an early 2015 MacBook Air (Model A1466, EMC2925). Every guide lists 10 screws to remove. However, I can only see 6: 4 on the leading edge of the front of the computer, and 2 on either corner of the hinge side.

I used a plastic wedge to pop two plastic snaps on the sides, but the hinge side won’t come apart without using a lot of force, and it seems as if I’m bending the case.

Is there something I’m missing?

设备:

MacBook Air 13" Early 2015

状态:

open

已接受的回答:

编辑： John

标题:

Removing the lower case of an early 2015 MacBook Air

文本:

I need to repair what I’ve identified as an early 2015 MacBook Air (Model A1466, EMC2925). Every guide lists 10 screws to remove. However, I can only see 6: 4 on the leading edge of the front of the computer, and 2 on either corner of the hinge side.

I used a plastic wedge to pop two plastic snaps on the sides, but the hinge side won’t come apart without using a lot of force, and it seems as if I’m bending the case.

Is there something I’m missing?

设备:

MacBook Air 13" Early 2015

状态:

open

已接受的回答:

原帖由： John

标题:

Removing the lower case of an early 2015 MacBook Air

文本:

I need to repair what I’ve identified as an early 2015 MacBook Air (Model A1466, EMC2925). Every guide lists 10 screws to remove. However, I can only see 6: 4 on the leading edge of the front of the computer, and 2 on either corner of the hinge side.

I used a plastic wedge to pop two plastic snaps on the sides, but the hinge side won’t come apart without using a lot of force, and it seems as if I’m bending the case.

Is there something I’m missing?

设备:

MacBook Air 13" Early 2015

状态:

open