存根页
This wiki page is a stub. Help us improve this page by adding information to it!
学生贡献的维基
此维基页面由我们教育项目的学生团队编写。
Speakers generate no sound
No sound is produced when connected to a stereo.
Wires are not properly connected to the stereo.
Check to make sure the wires are plugged into the correct ports in the stereo.
Damaged wires
Inspect the wires checking for cuts, kinks, fraying or missing wire insulation.
If there are any signs of damage or any sort of exposed cable this could be a sign of an interrupted signal. In this case it would be best to replace the wire.
Damaged or Blown Speakers
If the wires have been cleared as ok, the issue must be with the speakers. Speaker test
Distorted Audio
The sound produced for the speaker is either fuzzy, crackling, or rumbling.
Damaged Wires
Inspect the wires checking for cuts, kinks, fraying or missing wire insulation.
If there are any signs of damage or any sort of exposed cable this could be a sign of an interrupted signal. In this case it would be best to replace the wire.
Speakers are blown or damaged
If there is no damage found in the wires, the issue must be with the speakers. Speaker test
团队
iFixit, Team S1-G1, Weber Summer 2018 iFixit, Team S1-G1, Weber Summer 2018 的会员
FIX-WEBER-SU18S1G1
5 名成员
创作了43篇指南
0条评论