GameCube Controller Repair

作者: Sean Michel (和另外13个贡献者)

创建指南

指南

更换指南

iFixit 精选

Back Panel

iFixit 精选

Buttons

iFixit 精选

C Stick

iFixit 精选

Circuit Board

iFixit 精选

Directional Pad

iFixit 精选

Joystick

iFixit 精选

Rumble Motor

Stickbox

Triggers

iFixit 精选

Z Button

拆解

Nintendo GameCube Controller (Official) Teardown

Nintendo GameCube Controller Teardown

The Nintendo GameCube Controller, or DOL-003, was originally released in 2001, bundled with the Nintendo GameCube. Because of its compatibility with the Nintendo GameCube, the Nintendo Wii, and the Wii U (with a special attachment), it still is widely used as of 2013.

Departing from the 3-pronged design of its predecessor, the Nintendo 64 controller, the GameCube controller features two grips with a joystick and directional pad on the left side, a small start button in the center, and the A, B, X, and Y buttons along with a C stick on the right side. On the top edge of the controller are the left and right triggers, and the Z button located slightly above the right trigger. The controller also features a built in motor to provide "haptic feedback", or rumbling, while playing games.

A Nintendo GameCube controller is fairly easy to identify. If you flip over the controller so the buttons are facing down, you can find "Nintendo GameCube Controller DOL-003" engraved on the left side behind the C-Stick. This page specifically addresses a wired GameCube controller identified by a 6 foot long cable extending from the top of the controller and lacking an on/off switch and a battery pack as seen in the the wireless version. The standard colors include silver, purple, orange, and black, but there are several special edition colors like clear or gold.