Nintendo Switch Lite LCD Replacement 待编辑
|
事情
|
LCD |
|
标题
|
Nintendo Switch Lite LCD Replacement |
|
简介
|
Follow this guide to replace a faulty or damaged LCD on the Nintendo Switch Lite.
The Switch Lite uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.
***Note:*** This guide is for the ***LCD only***. If you're replacing the screen (the LCD attached to the digitizer) follow [guide|156978|this guide|new_window=true]. If the display glass is cracked or shattered, but the LCD still works, you’ll need to [guide|137500|replace the digitizer] instead.
***Note:*** Removing the joysticks and buttons isn’t required, but it makes this repair much easier.
***Note:*** This procedure requires removing the shield plate and heat sink. The thermal paste will need to be cleaned off of both components—as well as the CPU—and reapplied before reinstalling the shield plate and heat sink. |
|
结论
|
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [http://www.ifixit.com/Answers/Device/Nintendo%20Switch%20Lite)|Nintendo Switch Lite Answers community] for help. |
|
Thing |
|
|
Title |
任天堂Nintendo Switch Lite 屏幕更换LCD 显示屏更换 |
|
|
Introduction |
请按照本指南更换Nintendo Switch Lite上的故障屏幕或损坏的屏幕。 | | 请按照本指南更换 Nintendo Switch Lite 上的故障或损坏的 LCD 显示屏。 | | '''注意：'''不需要卸下操纵杆和按钮，但这使维修变得更加容易。 | | Nintendo Switch Lite 使用 JIS 规格螺丝。如果没有 JIS 螺丝刀，也可使用普通十字螺丝刀头。但操作时注意不要用力过度拧花螺纹。 iFixit 十字螺丝刀头专为兼容 JIS 螺丝而设计。 | | '''注意：'''如果显示屏玻璃破裂或破碎，但屏幕仍然可以工作，则需要[guide | 137500 |替换数字触控器]。 | | ***注意***： 本指南仅为更换 LCD 显示屏。如要更换整个屏幕模组（包含 LCD 显示屏和触控传感器），请参照[guide|156978|此指南|new_window=true]。如果屏幕上的玻璃破损，但显示功能正常，请参照以下指南[guide|137500|更换触控传感器]。 | | '''***注意***：'''此维修无需拆下摇杆和按键，但将其拆下可以让维修更容易。
***注意***：此过程需要卸下屏蔽板和散热器。在重新安装屏蔽板和散热器之前，需要清除两个组件以及CPU上的导热膏需要完全清理并重新涂抹屏蔽板、散热器，然后重新涂抹以及CPU上的导热膏。 |
|
|
Conclusion |
| 要重新组装设备，请按照逆序进行操作。 | | | 将你的电子垃圾带到[[E-Waste | R2或e-Stewards认证回收商| new_window = true]]。 | | 维修没有按计划进行吗？尝试一些[[基本故障排除后的故障排除Troubleshooting Problems After a Repair|基本的排障方法]]，或向我们的[http://www.ifixit.com/Answers/Device/Nintendo%20Switch%20Lite)|社区]寻求帮助。 |
|